YSHIELD® M6-82 | Magnetic field shielding plate | 80×21 cm


Magnetic field shielding plate. Self-adhesive flexible plate for shielding magnetic fields with 19-32 dB shielding. HF shielding attenuation of 120 dB


M6-82 is a flexible magnetic field shielding plate for shielding low frequency magnetic fields, the bottom is lined with a self-adhesive layer, the upper side is lined with aluminium. Thus, the M6-series is universally applicable. Narrow bending radii and right-angled bends can be realized without a loss in shielding attenuation. The self-adhesive layer is based on a high-quality permanent low-VOC acrylic adhesive with minimal odour. The aluminium surface offers a high frequency shielding of 120 dB if necessary (e.g. in MRI rooms). Single-layer processing has the best price/performance ratio, for higher magnetic flux densities, multi-layer processing is required.

It is suited for small surfaces in a domestic environment, as well as for large surfaces in construction, trade or industry. Additionally, there are various application possibilities in cars, electric vehicles, vans, mobile homes, campers.

Technical Specification

  • Size: 80 x 21 cm (shielding surface); 82 x 23 cm (total product)
  • Thickness: 0.6 mm
  • Attenuation magnetic fields (Three-phase): Single-layer 19.2 dB (89.0 %), two-layer 25.7 dB (94.8 %), three-layer 28.9 dB (96.4 %), four-layer 31.8 dB (97.4 %)
  • Attenuation magnetic fields (Single-phase): Single-layer 17.3 dB (86.3 %), two-layer 22.0 dB (92.0 %), three-layer 25.3 dB (94.6 &), four-layer 27.6 dB (95.8 %)
  • Attenuation magnetic fields (Static): DC consumers, earth magnetic field, permanent magnets are shielded in a range from 15 % (single-layer) to 58 % (four-layer)
  • Corrosion resistance: Corresponds to that of aluminium
  • Minimum bending radius: 20 cm
  • For reasons of innovation, we do not declare ingredients and magnetic key figures. The high-tech material has a high initial permeability and high saturation induction from 5 Hz to 50 kHz. In addition, static magnetic fields at 0 Hz are shielded, as are electromagnetic fields up to 40 GHz.


Attention: The M6-series can be cut with high-quality scissors! The cutting edges are as sharp as knives and need to be protected (e.g. with fabric tape) immediately after cutting! Use cut-resistant gloves during processing! We recommend planning the installation of the plates in a way that you do not have to cut them! Pay attention with larger wall spaces that the plates are a water vapour barrier. Application: This product has a permanent acrylic adhesive on the back side, which sticks to clean, grease-free and even surfaces. Pull off the protective film and glue the film with our scraper FVR10. Work carefully but do not press too hard to avoid damaging the aluminium surface. All plates of the shielding surface must overlap by at least 2 cm. Application using a stapler or Nailer: If the substrate is suitable, we recommend using an electric stapler or Nailer. For one layer including overlap, a medium-priced electric tacker is sufficient. For two or more layers, you will need a professional Nailer. The shielding surface must overlap by at least 2 cm. Multilayer installation: Always install the plates in an offset position – the surface is to cover the overlapping underneath. High-frequency shielding: The electrically conductive aluminium surface has an HF shielding attenuation of 120 dB, transition points to other shielding components can be easily sealed with aluminium adhesive tape.


When shielding magnetic fields, also pay attention to the electric fields. Grounding must be carried out to prevent the spread of electric fields. This is particularly easy with the M6 series with aluminium surface: For contacting, stick our GSX10 or GSX50 earthing tape to the aluminium surfaces of all mounted panels. Further components can be found under “Grounding“.

Delivery Time: Usually between 3 – 4 business days

Additional information

Weight 0.270 kg

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.



Continue as a Guest

PDF Data Sheet1724

Additional Information

Laboratory & expert report

We have already invested in our own professional EMV laboratory years ago. We not only use it to create our laboratory screening reports but also to check each batch daily. Additionally, we have all our products checked by an independent, well-respected expert. Double checked for twice the safety. Please find the reports above at the downloads.