Width: 130 cm
Length: 1 metre, available by the running meter. 20 metre roll available.
You can also order this product in measurements of your choice. For example:- 4.6 linear meters!
Attenuation: 100 dB at 1 GHz, two-layers 134 dB
Application: Wall interior, Ceiling, Floor
Weight: 140 g/m²
Material thickness: 0.08 mm
Colour: Anthracite / Brown (Can be over painted with an emulsion paint)
Tensile strength: Very good in both directions, 220 N/mm
Materials: Polyester, copper/nickel alloy, protection coating
Surface conductivity: 0.003 ohm (square resistance)
Delivery Time: Usually between 2 - 3 working days
This product cannot be shipped with DHL!
In case of processing HNG100 as an intermediate layer we recommend using our conductive dispersion glue DKL90 for adhesion. The wall and the backside of HNG100 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL90 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed.
Due to the highly conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields.
For professional grounding we recommend our Grounding plate Magnet - GM, in combination with Grounding cable GC-200 Plugged into Grounding plate Tube-GT/Attach to Heating Pipes for loose laying application, or our perforated stainless steel tape ELB for application in drywall constructions. For adhesion to walls use our Grounding plate Wall - GW with grounding strap EB-1 in combination with our dispersion glue DK90. Also available: 3 pin UK earth plug
The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. You'll find the PDF test report above on this page.